HOW TO USE THE MAXTRAX INDEFLATE

Deflating Tyres

1. Clip the Indeflate gauge onto your bull bar using the included bracket.
2. Unscrew the cap on your tyre valve and attach the Indeflate hoses to the valves using the quick release chucks. Do this on each of your two front tyres
3. Once attached, grab the pressure gauge and push in the slide release - this will begin deflating your tyres.
4. Monitor the gauge until it’s reached your desired pressure. Then pull out the slide release to stop deflating.
5. Repeat this process for your back two tyres.
6. Done! Stow away your MAXTRAX Indeflate and away you go!

Inflating Tyres

1. Clip the Indeflate gauge onto your bull bar using the included bracket
2. Unscrew the cap on your tyre valve and attach the hoses to the valves using the quick release chucks. Do this on each of your two front tyres
3. Ensure the slide release valve on the gauge is locked - so that you’ve got pressure on the gauge.
4. Attach your compressors hose straight onto the bottom of the Indeflate gauge & it will start inflating
5. Monitor the gauge until it’s reached your desired pressure, then remove your compressor hose.
6. Repeat this process for your back two tyres.
7. Done! Stow away your MAXTRAX Indeflate and away you go!

How to Use the Digital Indeflate